APM Technica sealants and adhesives

APM Epicol 284281 / Fflexible epoxy adhesive

Description
System: 2-component or 1-component freezer adhesive
Colour: grey
Consistency: viscous / thixotropic
Solid bodies: 100% / solvent-free
Pot life: 45 minutes
Curing: at room temperature or in oven
Temp. range: -55°C to +85°C, dense up to +175°C
More information

APM Epicol 284281 is a flexible Epoxy Adhesive. The product is available as two component set or as frozen one component adhesive. Epicol 284281 may be used for low stress bonds where high shear and peel strengths is needed. Plastics, metal or glass material, typically in the field of optical instruments, many customers know this adhesive as "grey lens glue" or gray prism adhesive, can be bonded. The bonding line is typically 0.15 mm thick, however due to the thixotropic behaviour it can be varied from 0.05 to 1.0 mm, depending on the dimension of the joined parts, specified temperature range of product and difference in coefficient of thermal expansion. Epicol 284281 is often used to glue glass or plastic windows in metal or plastic frames as well as adhesive and/or potting material in electronics equipment or sensors. The adhesive gives excellent bonding results for various materials as plastic, rubber, glass, ceramic, metal, wood and concrete.

APM Epicol 230004 / epoxy adhesive with extreme adhesion

Description
System: 2-component or 1-component freezer adhesive
Colour: beige red
Consistency: fluid / thixotropic
Solid bodies: 100% / solvent-free
Pot life: 90 minutes
Curing: at room temperature or in oven
Temp. range: -55°C to +125°C, dense up to +180°C
More information

APM Epicol 230004 is a viscous epoxy adhesive which cures at room temperature The adhesive is available as a 2-component adhesive or as premixed frozen adhesive (PMF). APM Epicol 230004 is used as a construction adhesive and has excellent adhesion. This extreme adhesion and good humidity ageing resistance permits its application in lightweight construction and to produce composite materials (CFRP, GRP). A thin glue line of 0.10 mm is typical. It can be varied from 0.05 to 0,8 mm due to its thixotropic properties depending on the dimensions of the parts to be bonded, the temperature range of the application and the difference in thermal expansion. Due to the extremely good shear and impact resistance and peel strength, it is excellent for bonding plastics, ceramics and metals. The adhesive produces excellent results for bonding a wide range of materials, such as glass, ceramics, metals, wood, concrete, rubber and most plastics.

APM Epicol 305795 / glass, metal adhesive

Description
System: 2-component or 1-component freezer adhesive
Colour: transparent bright yellow
Consistency: viscous
Solid bodies: 100% / solvent-free
Pot life: 120 minutes
Curing: at room temperature or in oven
Temp. range: -55°C to +85°C, dense up to +150°C
More information

APM Epicol 305795 is a viscous epoxy adhesive. The adhesive is available as a 2-component adhesive or as a deep-frozen 1-component adhesive. The typical applications for Epicol 305795 are in equipment assembly and precision optics for metal or glass bonds which must feature position stability. It is known by some customers as "Kreiskleber" (circle adhesive) or prism adhesive. A thin glue line of 0.25 mm is typical. It can be varied from 0.03 to 0.6 mm due to its thixotropic properties depending on the dimensions of the parts to be bonded, the temperature range and the difference in thermal expansion. Epicol 305795 is often used to adhere plastic or glass displays and as an adhesive and/or potting compound for electronic devices or sensors. The adhesive generally produces excellent results for bonding a wide variety of materials, such as glass, ceramics, metals, wood, concrete, rubber and most plastics.

APM Epicol 11 / fast curing flexible expoy adhesive

Description
APM number: 102700
System: 2-component adhesive in double cartridge
Colour: transparent, yellowish
Consistency: viscous
Pot life: 5 - 10 minutes
Curing: 1 hour at room temperature
Temp. range: -55°C to -85°C, dense up to 150°C
More information

APM Epicol 11 is a fast curing viscous epoxy adhesive. This universal adhesive is a two-component adhesive dosed from the double cartridge by a static mixing tube. The advantages are that the adhesive is easy to use and it cures fast at room temperature. The viscous reactive adhesive can be applied both as a thin glue line of over 0.05 mm or as a potting compound of up to several millimetres of layer thickness. This is practical for repair work and making prototypes when reinforcing materials can be bonded over the fracture point. Epicol 11 is used to glue plastic to glass, metal or plastic in devices and sensors. The adhesive produces generally excellent mechanical properties and resistances for bonding a wide range of materials, such as glass, ceramics, metals, wood, concrete, rubber and most plastics.

APM Unoflex Light 103620 / sealant adhesive

Description
APM number: 103620
System: 1-component adhesive/sealing compound
Colour: cream white
Consistency: stable / thixotropic
Solid bodies: 100% / solvent-free
Skin formation : 5 minutes
Temp. range: -40°C to +90°C
More information

Unoflex Light is a extremly light weight and highly flexible MS-Polymer Adhesive/Sealant with long therm flexible properties. The high performance sealant is solvent free, silicone-oil free and weather resistant. Unoflex Light requires no mixing procedure and cures fast at room temperature. Typically bonding line is from 0.2 – 0.8 mm thick, the gap can also be higher, the product has non flowable properties. The thickness of the bonding line depends more on the size of the parts and the specified temperature range. It can be used to seal plastic parts or glass displays in optical instruments or housings for electronics. Unoflex light can also be used to form sealing beads on the parts and will cure with a dry surface. The sealant bead has a good adhesion on various materials like glass, ceramics, plastics and metals.

APM Epsilon 2103 / adhesive for precision optics / watchmaking

Description
APM number: 101698
System : 2-component or 1-component freezer adhesive
Colour: colourless, transparent
Consistency: low viscosity, capillary
Solid bodies: 100% / solvent-free
Pot life: 8 hours
Curing: 3 days at room temperature or in heating cabinet
Temp. range: -55°C to +85°C, dense up to +175°C
More information

APM Epsilon 2103 is a very low viscosity, flexible epoxy adhesive with excellent capillary tendency. The adhesive is available as a 2-component adhesive or as a deep-frozen 1-component adhesive. APM Epsilon 2103 is generally used in the watch-making industry to make age-resistant bonds for clock glasses and crystals or in the optics industry to bond optical glasses. APM Epsilon 2103 is highly resistant to yellowing, even if exposed for extended periods to UV light. Typically, adhesive bonds of very few micronmeters can be used as well as adhesive bonds up to 0.2 mm due to the low setting shrinkage of the adhesive. The adhesive generally produces excellent results for bonding a wide variety of materials, such as glass, ceramics, metals, wood, concrete, rubber and most plastics.

APM Epicol 84S / room temperature curing silver adhesive

Description
APM number: 202391
System: 1-component deep-frozen epoxy adhesive
Colour: silver grey
Consistency: viscous / thixotropic
Solid bodies: 100% / solvent-free
Pot life: 120 minutes
Temp. range: -55°C to +150°C
More information

APM Epicol 84S is a universally applicable, silver-filled, electrically conductive epoxy adhesive. Electrical and thermal conductivity is produced by particles containing silver. Epicol 84S is used when silver is required due to its excellent electrical and thermal conductivity properties but when curing cannot take place at temperatures over 100°C due to temperature-sensitive substrates. The 1-component adhesive can be easily dispensed from the cartridge using dosing needles with a diameter of > 0.25 mm. Store the adhesive deep frozen. In this state it is very stable. The adhesive easily bonds a wide variety of metals and is therefore suitable for many applications.

APM Epicol 84E / lower-priced, electrical and conductive adhesive

Description
APM number: 103621
System: 1-component deep-frozen epoxy adhesive
Colour: dark grey
Consistency: viscous / thixotropic
Solid bodies: 100% / solvent-free
Pot life: 60 minutes
Temp. range: -55°C to +150°C
More information

APM Epicol 84E is a universally applicable, cost-efficient, electrically conductive epoxy adhesive containing no silver. Electrical and thermal conductivity is produced by particles containing nickel. Epicol 84E is applied when silver cannot be used due to price fluctuations or corrosion caused by silver in contact with salt water. The 1-component adhesive can be easily dispensed from the cartridge using dosing needles with a diameter of > 0.25 mm. Store the adhesive deep frozen. In this state it is very stable. The adhesive easily bonds a wide variety of metals and is therefore suitable for many applications.

Datasheets

Please fill out the form below and you will receive access to the data sheets.